Lexmark XM9100 Series User Manual page 185

Understanding the printer menus
Use
Print Area
Normal
Whole Page
Download Target
RAM
Flash
Disk
Resource Save
On
Off
Print All Order
Alphabetical
Oldest First
Newest First
To
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
•
Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
•
Storing downloads in a flash memory or in a printer hard disk
places them in permanent storage. Downloads remain in the
flash memory or printer hard disk even when the printer is
turned off.
• This menu item appears only if an optional flash memory or
printer hard disk is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
•
Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
Specify the order in which held and confidential jobs are printed
when Print All is selected.
Note: Alphabetical is the factory default setting
185