Lexmark XM9100 Series User Manual page 233

Maintaining the printer
Warning—Potential Damage: Do not touch the transfer belt. Doing so may affect the print quality of future
print jobs.
8
Insert the new transfer module until it clicks into place.
9
Place the paper guide back into place.
10
Tighten the screws of the transfer module lock.
11
Reinstall the door stopper.
12
Close door C.
Replacing the transfer roller
1
Open door C. Make sure that it does not hit any cable attached to the printer.
Note: If the 3000‑sheet tray is installed, then slide the tray to the right to open the door.
233