Lexmark XM9100 Series User Manual page 142

Understanding the printer menus
Use
Edit Building Blocks
Internal Accounts
NTLM
Simple Kerberos Setup
Kerberos Setup
Active Directory
LDAP
LDAP+GSSAPI
Password
PIN
Edit Security Templates
[list of available templates]
Edit Access Controls
Administrative Menus
Function Access
Apps Configuration
Management
Solutions
Cancel jobs at the Device
Miscellaneous Security Settings menu
Use
Login Restrictions
Login failures
Failure time frame
Lockout time
Panel Login Timeout
Remote Login Timeout
To
Edit settings for Internal Accounts, NTLM, Simple Kerberos Setup, Kerberos Setup,
Active Directory, LDAP, Password, and PIN.
Add or edit a security template.
Control access to printer menus, firmware updates, held jobs, and other access
points.
To
Limit the number and time frames of failed login attempts from the printer control
panel before all users are locked out.
Notes:
• "Login failures" specifies the number of failed login attempts before users are
locked out. Settings range from 1 to 10 attempts. "3 attempts" is the factory
default setting.
•
"Failure time frame" specifies the time frame during which failed login
attempts can be made before users are locked out. Settings range from 1 to 60
minutes. "5 minutes" is the factory default setting.
•
"Lockout time" specifies how long users are locked out after exceeding the
login failures limit. Settings range from 1 to 60 minutes. "5 minutes" is the
factory default setting. 1 indicates that the printer does not impose a lockout
time.
•
Panel Login Timeout specifies how long the printer remains idle on the home
screen before automatically logging off the user. Settings range from 1 to 900
seconds. "30 seconds" is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging off the user. Settings range from 1 to 120
minutes. "10 minutes" is the factory default setting.
142