Lexmark XM9100 Series User Manual page 167

Understanding the printer menus
Use
Temperature
‑4 to 4
Enable Color Fax Scans
Off by default
On by default
Never use
Always use
Auto Convert Color Faxes to Mono
Faxes
On
Off
Fax Receive Settings
Use
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Answer
Yes
No
Manual Answer Code
0–9
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multipurpose Feeder
Sides (Duplex)
Off
On
To
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Enable color faxing.
Note: Off by default is the factory default setting.
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Allow the printer to answer an incoming fax job.
Note: Yes is the factory default setting.
Enter a code on the telephone number pad to begin receiving a fax.
Notes:
•
*9* is the factory default setting.
• This menu item is used when the printer shares a line with a telephone.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two‑sided printing for incoming fax jobs.
Note: Off is the factory default setting.
167