Smart Tachless Mode - CrimeStopper Super Rage CS-2011RS Installation Instructions Manual

WIRING FOR REVERSE POLARITY DOOR LOCKS
BLUE/WHITE
GREEN
MASTER
SWITCH
UNLOCK WIRE
The CS2011RS includes a Tachless engine monitor. When in Smart Tachless mode, the module actively
monitors the vehicle over the life of the installation regardless of weather or battery conditions.
Tachless mode will adjust to compensate for most conditions for optimum operation efficiency.
IMPORTANT NOTE: Due to fluctuating voltages, vehicles with dual batteries may result in poor performance
when using "Smart" Tachless Mode.
CS2011RS on vehicles using 2 [or more] Batteries.
SETTING UP THE SMART TACHLESS MODE: (No Tach Wire Required)
1) DO NOT START VEHICLE! Turn IGN ON, turn HEADLIGHTS ON and FAN BLOWER for 3-4 minutes to
drain off excess surface charge on the vehicle's battery.
2) After drain off, connect the (2) RED +12V input wires or plug-in white High-Current harness on module.
3) The unit will automatically read voltage and program itself for your vehicle when power is applied.
SEPARATE DRIVER'S DOOR UNLOCK WIRING
RED
BLUE
85 86
87
30 87A
+
CUT

SMART TACHLESS MODE

Use a Tach wire and program a Tach source when installing a
85 86 85
87
87A 87A
30
L
CUT
UL
CUT
LOCK WIRE
FUSED
+12V
+
86
87
30
Smart