Table of Contents
Advertisement
Crestron Isys™ TPS-5000L
Operations Guide - DOC. 5783A
12 Inch Lectern/Wall Mounted Touchpanel
Typical Connection Diagram when Uploading a Project Directly to the Touchpanel
RS-232
via Crestron Cable Number
STCP-502PC or equivalent
1. Start SIMPL Windows or VT Pro-e.
2. From the menu bar, select Tools | Viewport to open the Crestron Viewport.
(If communication settings are correct, the prompt should be TPS for direct
communications).
3. Refer to the following figure. From the Viewport menu, select Setup |
Communications settings (alternatively, press Alt+D) to open the "Port
Settings" window.
Setup | Communications Settings Command
4. Select RS-232 as the connection type. Verify that an available COM port
(COM 1 is shown after this step) is selected, and that all communication
parameters and necessary options from the "Port Settings" window are
selected as shown after this step. Click the OK button to save the settings
and close the window.
12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L • 37
Advertisement
Table of Contents
