Uploading A Simpl Windows Program - Crestron Isys TPS-5000L Operation Manual

12 Inch Lectern/Wall Mounted Touchpanel
A control system source file has
the extension .smw. A compiled
SIMPL Windows file has the
extension .spz for a 2-Series
control system, .bin for CNX
generation, and .csz for CNX
generation with SIMPL+.
38 • 12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L
"Port Settings" Window
NOTE: Different control systems may require different communication settings.
Refer to each control system's Operations Guide for proper communication settings.
NOTE: If connecting to the touchpanel through a control system, the baud rate may
need to be set to 38400 baud (Cresnet speed) for a successful transfer.
NOTE: If connecting to a touchpanel through a control system, control system
communications can be verified by selecting Diagnostics | Establish
Communications (Find Rack). This should display a window that gives the COM
port and baud rate. If communication cannot be established, refer to the
"Troubleshooting Communications" section in the respective Operations Guide for
the control system.

Uploading a SIMPL Windows Program

The SIMPL Windows file can be uploaded to the control using SIMPL Windows or
via the Crestron Viewport.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the "Open" window, navigate to the SIMPL
Window file (.smw), and click Open.
3. Select Project | Transfer Program.
Crestron Isys™ TPS-5000L
Operations Guide - DOC. 5783A