Table of Contents
Advertisement
Crestron Isys™ TPS-5000L
Operations Guide - DOC. 5783A
12 Inch Lectern/Wall Mounted Touchpanel
AUDIO Pinouts-Balanced
PIN #
DESIGNATION
1
S
2
R+
3
R-
4
L+
5
L-
6
S
NOTE: When sending balanced audio from a CNX-BIPAD8, only the Positive (+)
and Negative (-) wires are to be connected to the touchpanel. Do not connect the
Shield (S) wires.
AUDIO Pinouts-Unbalanced
PIN #
DESIGNATION
1
S
2
R+
3
R-
4
L+
5
L-
6
S
NOTE: Using two jumpers, connect R Shield to R – and L Shield to L – respectively
at the TPS-5000L Audio Input connector. Refer to the following diagram.
Wiring for Unbalanced Audio
+
-
+
-
S
R
R
L
L S
+
+
Jumpers
NOTE: The TPS-5000L can receive audio signals over CAT5 wiring. For additional
information on audio connections over CAT5, refer to the latest version of the
Crestron CAT5 Wiring Reference Guide (Doc. 6137) which is available from the
Downloads | Product Manuals section of the Crestron website (www.crestron.com).
MIC OUT
This 3-position mini-connector provides balanced line level microphone output with
AGC. A description of the pinouts is shown in the table after this paragraph.
12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L • 17
DESCRIPTION
Shield (no connection)
Right Input (Positive)
Right Input (Negative)
Left Input (Positive)
Left Input (Negative)
Shield (no connection)
DESCRIPTION
Ground
Right Input (Positive)
Right Ground
Left Input (Positive)
Left Input Ground
Ground
Advertisement
Table of Contents
