Crestron Isys TPS-5000L Operation Manual page 19

Crestron Isys™ TPS-5000L
Operations Guide - DOC. 5783A
12 Inch Lectern/Wall Mounted Touchpanel
Video Setup (Horizontal Lines Portray Video Sample)
Use this screen to select one of the video inputs and adjust the brightness, contrast,
saturation, and hue, if necessary. The user has the option to force the video image to
a certain mode (i.e., composite video or S-video if using the TPS-VIDL-1 or
TPS-VIDL-2 in S-video configuration) or switch modes automatically after checking
the image for colors. Use either the TP Composite / BNC Composite or
TP S-Video / BNC S-Video buttons to manually control the mode. TP or BNC on
the selected button specifies the video input connector. TP corresponds to the twisted
pair connector (balanced video from a PVID, Room Box, etc.) and BNC corresponds
to the BNC connectors (unbalanced video from a VCR, DVD, etc.). Use the
appropriate Auto Detect button for automatic control. The text color of the selected
button is red rather than black.
NOTE: When configuring the TPS-VIDL-2, the Video 1 signal type can be
automatically detected as long as one signal is sent to the touchpanel.
NOTE: Up to four composite video feeds can be physically connected to a TPS-
VIDL-2 (two BNC feeds and two twisted-pair feeds). However, only two composite
video channels can be selected for viewing. Specify the connections to use by
selecting TP composite, TP S-Video, BNC Composite, or BNC S-Video for each
channel.
NOTE: A solid blue screen is displayed in the video window if a video signal is not
detected or is very weak. Verify that the video source is functioning and properly
connected. If the source is properly connected and functioning, a distribution
amplifier may need to be used.
Fast motion mode (if the Fast Motion button is selected) reduces motion artifacts
and should be used for most video sources. Still video mode (if the Still Video
button is selected) works best for still pictures. It has a maximum resolution and
reduces flicker. However, it suffers from motion artifacts. The text color of the
selected button is red rather than black.
Select the Soft button for soft mode video. In this mode, video filtering and noise
reduction can produce a better image from some sources. Alternatively, select the
Sharp button for sharp mode video. This mode provides maximum detail, but is
more susceptible to noise in source. The text color of the selected button is red rather
than black.
12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L • 15