Firmware Upgrade - Crestron Isys TPS-3000L Operation Manual

6.4" Lectern/Wall Mounted Touchpanel
A firmware upgrade file has the
extension .csf.
42 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L
4. Click Browse. The "Open" window appears as shown in the following
illustration.
"Open" Window
5. Select the VT Pro-e (vtz) file and click Open. The transfer will
complete automatically.

Firmware Upgrade

To take advantage of all the TPS-3000L features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website
(http://www.crestron.com/downloads/software_updates.asp) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
1. Make sure that "Communication Settings" that begins on page 37 has
been performed.
2. As shown after this step, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
File Transfer | Update Touchpanel Firmware Command
3. As shown after this step, select the NET ID of the TPS-3000L
touchpanel and then click OK. The "Open" window appears (refer to
the subsequent graphic).
Crestron Isys™ TPS-3000L
Operations Guide – DOC. 6077