User Manual
Phone auto test
This feature depends on your system.
The auto test of the phone is a quick hardware test of the sound, the display and the LEDs. It lets the user
do the first tests directly from the desktop.
•
The phone is switched on and connected.
•
Reach the 'Menu' page.
•
Settings Options Phone test
•
Auto test has started.
•
To stop the auto test.
Access to administrator configuration (only available in IP mode)
Your administrator can access to the phone configuration. Depending on the system configuration, an
administrator password is requested to access this menu.
This menu is only available when the desk phone is running in IP mode.
In this configuration menu, use this icon to go back.
•
Use one of the following:
o Open the user local menu: reach the 'Menu' page
Config.MMI.
o Connect your desk phone to the network (and plug in the power jack if you are using an
external power adapter). When the desk phone displays the 'Step 2' during the boot,
repeatedly press the '*' and '#' keys in succession until a menu is displayed.
•
This section allows the administrator to set or consult:
o IP parameters:
o DHCP option:
o Phone memory:
o Used network (wired or wireless):
o Wired network configuration:
o Wireless network configuration:
o VPN configuration:
o Security:
o Software information (version, run mode):
o Hardware information (MAC, CPU):
o Software update mode:
▪
▪
o Factory configuration:
8AL91433ENAAed01
IP Parameters IP Status
IP Parameters IP Config
IP Parameters Memories
Network Wired network
VPN
Security
Software infos Upgrade
Enable software
upgrade: upgrade via network (system).
Upgrade from USB
now: use a USB drive to upgrade the software when you
restart the desk phone.
Reset to Defaults
Settings Phone Local Menu
Network
Network Wireless network
Software infos
Hardware infos
54 /70