Contacting your administrator (Technical support)
Phone auto test
The auto test of the phone is a quick hardware test of the sound, the display and the LEDs. It lets the
user do the first tests directly from the desktop.
•
The phone is switched on and connected.
•
Reach the 'Menu' page.
•
Settings Options Phone test
•
Auto test has started.
•
To stop the auto test.
Access to administrator configuration
Your administrator can access to the phone configuration. Depending on the system configuration, an
administrator password is requested to access this menu.
•
Start your desk phone by connecting it to the network (and plugging in the power jack if you are
using an external power adapter).
•
When the desk phone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
•
This section allows the administrator to set or consult:
o IP parameters:
o DHCP option:
o Phone memory:
o Used network (wired or wireless):
o Wired network configuration:
o Wireless network configuration:
o VPN configuration:
o Security:
o Software information (version, run mode):
o Hardware information (MAC, CPU):
o
Beacon activation:
o Software update mode:
▪
▪
o Network default parameters (reset configuration):
o Factory configuration:
8AL90340ENADed01
IP Parameters IP Status
IP Parameters IP Config
IP Parameters Memories
Network Wired network
VPN
Security
Hardware info Bluetooth info Beacon: Enable Beacon
Software infos Upgrade
Enable software
upgrade: upgrade via network (system).
Upgrade from USB
now: use a USB drive to upgrade the software when you
restart the desk phone.
Reset to Defaults
Network
Network Wireless network
Software infos
Hardware infos
Network Set default
93 /115