Electromagnetic Properties / Safety Distances; Electromagnetic Emission - Barkey plasmatherm Instructions For Use Manual

3.4

Electromagnetic properties / safety distances

3.4.1

Electromagnetic emission

Gui delines and manufacturers declarati on - Electromagnetic emission
The Barkey plas matherm is intended for operation in one of the environ ments listed below.
The customer or user of the Barkey p lasmatherm must ensure that it is operated in one of these
environments.
Radi ated EMI measurements
HF outputs in accordance with
CISPR 11
HF outputs in accordance with
CISPR 11
Harmonic output in accordance
with IEC 61000-3-2
Emission of voltage fluctuations/
flicker according to IEC 61000-3-3
Electromagnetic environment -
Compliance
guidelines
The Barkey plas matherm uses
high-frequency energy for inter-
nal functions only. This means
Group 1
that HF emission is very low, and
neighbouring electronic devices
are unlikely to be affected.
Class B The Barkey plas matherm is suit-
able for use in buildings other
than residential and those which
Class A
are direct ly connected to a public
supply network which is also
Co mplies
used to supply buildings used for
residential purposes.
Safety advice