Function Button Assignment - Barkey plasmatherm Instructions For Use Manual

Operation
NOTE
Time settings and undulation functions are not available in continuous operation.
4.5

Function button assignment

The top two function buttons on the operating panel are assigned programs which you can
start as soon as you switch on the device without going through the menu system.
In the "Function Buttons" option of the user menu, you can assign the two buttons as
shortcuts for the programs which you use most frequently, or you can assign any desired
programs.
U s er m e nu
B a c k
P r o g r am
H e a t i ng d u ra t i o n
F u n c t io n b ut t o n s
F i l l le v e l
▼
Figure 27: User menu
B L O O D
P r o g ra m m i ng t h e
f u n c ti o n bu t t o n s
Figure 28: Assigning shortcut programs
to the top two function buttons
These settings are retained until the buttons are re-assigned.
O K ▲
P L A SM A
O K
►
In the main screen, press the confirm
button ("Menu") to start the menu
system.
The user menu appears.
►
Using the left or right selection button
("▼" or "▲") in the user menu, select
"Function Buttons", then press the
"OK" button to confirm your choice.
A screen is displayed showing both cur-
rently set shortcut programs, e.g.
"BLOOD" and "PLASMA" as shown in
the adjacent figure.
►
Press the top left-hand function button
repeatedly until the desired program is
displayed on the left.
►
Similarly, assign a program to the top
right-hand function button.
►
Now confirm your choices by press-
ing the confirm button ("OK") once
the two programs have been assigned
as required.