Barcode Scanner - Barkey plasmatherm Instructions For Use Manual

4.7

Barcode scanner

If a barcode scanner is connected to the Barkey plasmatherm DTM and properly config-
ured in the service menu, then the user ID and up to 8 sample ID's can be scanned in in
the main screen.
2 5 . 1 1 . 09
P L A S M A
I D : - - -
1 : - - -
2 : - - -
3 : - - -
4 : - - -
5 : - - -
6 : - - -
7 : - - -
8 : - - -
▼
Figure 32: User ID and sample ID
If no user ID or sample ID has yet been scanned in, the reverse highlighted text "ID":
marks the cursor position for entering the user ID. When the appropriate barcode has been
scanned in, it is displayed at the "ID" position and the input cursor moves down auto-
matically to the position for the first sample ID ("1:"). If a user ID is not required, you
can scan in a dummy code or move to the position of the first sample ID by pressing the
left-hand selection button ("▼"). You can now scan in the corresponding sample ID. The
cursor moves automatically to the next position after each scan.
2 5 . 1 1 . 09
P L A S M A
I D : 8 3 70 3 3 7 18 8 3 8 2
1 : 4 0 06 1 4 4 10 4 5 1 8
2 : - - -
3 : - - -
4 : - - -
5 : - - -
6 : - - -
7 : - - -
8 : - - -
▼
Figure 33: Scanned user ID and sample ID
It is not necessary to scan in all 8 sample ID's. A program can be started at any time.
If an 8th sample ID is scanned in however the insertion point will move to the "▼" icon
and this will also be shown reverse highlighted. No more barcodes can now be scanned
in.
1 3 : 5 1 :2 6
B L OO D
M e n u
1 3 : 5 1 :2 6
B L OO D
M e n u
Operation