Symbols Used On Labels - Barkey plasmatherm Instructions For Use Manual

2.3.2

Symbols used on labels

Labels showing printed symbols are affixed to the device. These have the following
meaning:
IPX 1
2010
This symbol means that the device is protected against vertically drip-
ping water according to IEC 601-1 in its intended operation conditions.
This symbol shows the year of manufacture as a four-digit number.
This symbol declares that the device conforms to Medical Device Di-
rective 93/42/EEC of 14 June 1993. The four-digit number indicates the
appointed body (TÜV SUED Product Service GmbH) which supervises
the manufacturer's quality assurance system.
This symbol indicates the month and year in which the next safety in-
spection is due.
This symbol advises you that you must read the instruction manual sup-
plied thoroughly.
This hazard symbol advises you that failure to follow the instructions
contained in the instruction manual can result in hazards to patients, the
device user or the device itself.
This symbol advises you that the device must be disconnected from the
mains supply before the device housing can be opened by removing the
device screws.
This symbol (on a label inside the device) informs you of the earth con-
nection.
Description of the device