Warranty And Disclaimer - Barkey plasmatherm Instructions For Use Manual

Table of Contents

Advertisement

Warranty and disclaimer

8
Warranty and disclaimer
The warranty period for the Barkey plasmatherm is 24 months from purchase.
Barkey GmbH & Co. KG gives this warranty in lieu of other warranties on this product
granted under contract or statute, including other statutory warranties of marketability or
of fitness for a particular purpose, and gives no other commitments.
Because Barkey GmbH & Co. KG has no control whatsoever over the quality of servic-
ing work that is not carried out by Barkey personnel, and because Barkey GmbH & Co.
KG cannot control the effects which such servicing and repairs might have on the device
and its serviceability, Barkey GmbH & Co. KG cannot accept any liability for damage to
property, personal injury or consequential losses arising out of the use of a device which
has not been repaired or serviced by Barkey service personnel.
Barkey GmbH & Co. KG accepts no responsibility for indirect losses or consequential
losses of any kind and limits its obligations solely to the repair or replacement of the de-
vice.
Barkey GmbH & Co. KG accepts no responsibility or liability whatsoever for the use of
accessories other than those indicated in these instructions for use, for the use of non-
original components or for any use/installation which does not conform to the instructions
for use accompanying such components. The use of components and accessories other
than those referred to in the instructions for use shall result in a reduction of the manufac-
turer's warranty for the device.
Barkey GmbH & Co. KG only holds itself responsible for effects on the safety, reliability
and performance of the device when
extensions, resettings, modifications or repairs are carried out by persons it has
authorised, and
the technical safety inspections and servicing has been demonstrably carried out by
suitable specialists at the prescribed intervals and as directed by the manufacturer,
and
the electrical installation at the point of use complies with the local regulations and
the device data and, where applicable, with IEC requirements
the device is used in accordance with these instructions for use, and
the electrical safety has been demonstrably checked and tested according to the appli-
cable regulations and at the prescribed intervals.
WARNING
Barkey GmbH & Co. KG can accept no liability for modifications and repairs to
the devices made by the purchaser or unauthorised third parties without consulting
the supplier.
We advise you to have any necessary repairs and regular servicing carried out by
Barkey GmbH & Co. KG.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

212.10043212.10044

Table of Contents