Presetting The Heating Duration And Starting The "Blood" Program; Presetting The Heating Duration And Starting The "Hpc" Program - Barkey plasmatherm Instructions For Use Manual

Operation
Conditions
Program
PLASMA (approx. 170 x
110 x 20 mm)
no additional
packaging
Heating duration in minutes to reach 5°C
System temperature
45°C
37°C
Heating duration in minutes to reach 33°C
System temperature
45°C
37°C
4.4.8

Presetting the heating duration and starting the "BLOOD" program

WARNING
Plasma, blood and HPC may only be heated for a limited period of time!
Do not use the device to keep these products warm indefinitely!
WARNING
Blood/whole blood may not be heated up if the current operating temperature of
the device is over 37 °C. The device will display a warning message in this case.
The process for presetting the heating duration and starting the "PLASMA" program is
described in the Chapters Selecting and starting the "PLASMA" program and Messages
at the start of a program; to preset the heating duration and start the "BLOOD" program,
please proceed in the same way but select "BLOOD" instead of "PLASMA" as the pro-
gram.
4.4.9

Presetting the heating duration and starting the "HPC" program

WARNING
FFP Filling vol-
Dimensions ume per FFP
250ml
1
11
14
1
14
22
Loaded with Loaded with
1 FFP 2 FFP´s
Number of FFP´s (see Table 1 for layout)
2
11
14
Number of FFP´s (see Table 1 for layout)
2
14
22
Loaded with Loaded with
3 FFP´s 4 FFP´s
3 4
12 12
15 15
3 4
16 20
24 30