Loading - Barkey plasmatherm Instructions For Use Manual

4.3

Loading

The Barkey plasmatherm can be loaded with product in two ways:
1. between the heating cushions (effective loading)
2. between dry-paper (filter paper, see also the Chapter Dry paper) and the lower cush-
ion (in an emergency only; this option is intended for emergencies and involves a
longer warm-up phase because the product on the bottom of the heating chamber is
not heated from both sides.)
►
Lift up the heating cushions by the grip and place the product to be heated or thawed
in the required position.
WARNING
Do not place conserves beneath the paddle. The paddle is marked red to aid ident i-
fication.
►
Place the heating cushions back over the conserves without any folds if possible.
►
Close the heating chamber cover until the cover button engages.
Operation