Dry Paper - Barkey plasmatherm Instructions For Use Manual

Cleaning and care
5.2

Dry paper

When the device is shipped, the heating chamber floor is lined with filter paper (dry pa-
per) for hygiene control. The dry paper will indicate any leaks in the conserves or con-
tamination within the device itself, enabling early recognition.
If the filter paper becomes moist, the two sensors (metal contacts) on the heating chamber
floor are short-circuited, triggering an audible signal and a flashing warning message in
the display.
►
Replace the dry paper after carrying out a full cleaning routine.
NOTE
Dry paper can be ordered from Barkey GmbH & Co. KG:
Article No. 212.10005, pack of 60 sheets