Power Module Status Led; Mode Led - H3C S6520XE-HI Series Installation Manual

Table of Contents

Advertisement

Table 20 System status LED description
LED mark
SYS

Power module status LED

The switch provides two power module slots at the rear panel. For each power module, the switch
provides a power module status LED on the front panel.
Table 21 Power module status LED description
LED mark
PWR1
PWR2

MODE LED

To show more information about the switch through the SFP+ port status LEDs and QSFP+ port
status LEDs, the switch provides a MODE LED. The MODE LED indicates the types of information
that the SFP+ port status LEDs and QSFP+ port status LEDs are showing.
You can use the port LED mode switching button to change the indication of the MODE LED.
Table 22 Description for the MODE LED
LED mark
MODE
Status
Description
Steady green
The switch is operating correctly.
Flashing green
The switch is performing power-on self test (POST).
Steady red
The switch has failed POST or is faulty.
Flashing red
Some ports on the switch have failed POST or are faulty.
Off
The switch is powered off or the system fails to start up.
Status
Description
A power module is installed in power module slot 1, and the power
Steady green
module is outputting power correctly.
A power module is installed in power module slot 1, but no power is
Steady yellow
input to the power module or an output failure has occurred.
Off
No power module is installed in power module slot 1.
A power module is installed in power module slot 2, and the power
Steady green
module is outputting power correctly.
A power module is installed in power module slot 2, but the no power
Steady yellow
is input to the power module or an output failure has occurred.
Off
No power module is installed in power module slot 2.
Status
Description
Steady green
The SFP+ port status LEDs and QSFP+ port status LEDs indicate port rates.
The SFP+ port status LEDs and QSFP+ port status LEDs indicate the IRF
Flashing
member ID of the switch. For example, if the LEDs for ports 1 to 5 are steady
yellow
green and the other LEDs are off, the IRF member ID of the switch is 5.
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

S6520xe-54qc-hi

Table of Contents