Table of Contents
Advertisement
Appendix C Ports and LEDs
Fixed ports
Console port
The switch has two console ports: a serial console port and a micro USB console port.
Table 11 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Services
Management Ethernet port
The switch provides a management Ethernet port on the front panel. You can connect this port to a
PC or management station for loading and debugging software or remote management.
Table 12 Management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and max
transmission distance
Functions and services
USB port
The switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the flash of the switch, for example,
to upload or download application and configuration files.
NOTE:
USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee the
correct operation of USB devices from all vendors on the switch. If a USB device fails to operate on
the switch, replace it with one from another vendor.
Serial console port
RJ-45
EIA/TIA-232
9600 bps (default) to 115200 bps
•
Provides connection to an ASCII
terminal.
•
Provides connection to the serial port
of a local PC running terminal
emulation program.
Specification
RJ-45
1
10/100/1000 Mbps, half/full duplex
100 m (328.08 ft) over category-5 twisted pair cable
Switch software and Boot ROM upgrade, network management
37
Micro USB console port
Micro USB Type B
USB 2.0
•
Provides connection to an
ASCII terminal.
•
Provides connection to the USB
port of a local PC running
terminal emulation program.
Advertisement
Table of Contents
