Table of Contents
Advertisement
Attach the rear mounting brackets to the rack:
3.
Orient the brackets with the wide flange inside or outside the rack as required.
a. Install cage nuts (user-supplied) in the mounting holes in the rear rack posts.
Make sure the corresponding cage nuts on the left and right rear rack posts are at the same
height.
b. Attach the rear mounting brackets to the rear posts with M6 screws (user-supplied).
Do not fully tighten the M6 screws before mounting the switch in the rack.
Figure 6 Attaching the rear mounting brackets to the rack with the wide flange inside the
rack
Figure 7 Attaching the rear mounting brackets to the rack with the wide flange outside
the rack
7
Advertisement
Table of Contents
