Table of Contents
Advertisement
Mount the switch chassis in the rack:
4.
a. Install cage nuts (user-supplied) on the front rack posts.
Make sure the corresponding cage nuts on the left and right front rack posts are at the same
height.
b. One person supports the chassis bottom with one hand, holds the front part of the chassis
with the other hand, and pushes the chassis into the rack gently.
Make sure the shoulder screws closely contact with the upper edges of the rear mounting
brackets, as shown in
c. The other person attaches the front mounting brackets with M6 screws (user-supplied) to
the front rack posts.
Make sure the front and rear mounting brackets have securely attached the switch to the
rack.
Figure 8 Mounting the switch in the rack (with the wide flange of the rear mounting
brackets inside the rack)
Figure 8
and
Figure
9.
8
Advertisement
Table of Contents
