Table of Contents
Advertisement
1/10GBase-T autosensing Ethernet port
The LSWM2XGT2PM interface card provides 1/10GBase-T autosensing Ethernet ports.
Table 13 1/10GBase-T autosensing Ethernet port specifications
Item
Connector type
Interface attributes
Transmission medium and
max transmission distance
Standards
SFP+ port
The switch provides 48 fixed SFP+ ports on the front panel. To connect the peer SFP+ ports over a
long distance, use SFP/SFP+ transceiver modules and fibers. To connect the peer SFP+ ports over
a short distance, use SFP or SFP+ cables. You can install the GE SFP transceiver modules and
cables in
Table
in
Table 16
Table 14 GE SFP transceiver modules and cables available for the SFP+ ports
GE SFP
transceiver
module and
cable
SFP transceiver module
SFP-GE-T
SFP-GE-T-D
SFP-GE-SX-MM
850-A
SFP-GE-SX-MM
850-D
Specification
RJ-45
1/10 Gbps, full duplex, MDI/MDI-X auto-sensing
•
•
•
•
IEEE 802.3ab and 802.3an
14, 10 Gbps SFP+ transceiver modules in
in the SFP+ ports.
Central
wavelength
(nm)
N/A
N/A
850
850
Category-6 UTP—55 m (180.45 ft)
Category-6 STP—100 m (328.09 ft)
Category-6 SFTP—100 m (328.09 ft)
Category-6 and above twisted pair—100 m (328.09 ft)
Cable/fiber
Connector
diameter
(µm)
Category-5
RJ-45
twisted pair
Category-5
RJ-45
twisted pair
Multi-mode,
50/125
LC
Multi-mode,
62.5/125
Multi-mode,
50/125
LC
Multi-mode,
62.5/125
38
Table
15, and 10 Gbps SFP+ cables
Multimode
fiber modal
Max transmission
bandwidth
distance
(MHz × km)
N/A
100 m (328.08 ft)
N/A
100 m (328.08 ft)
500
550 m (1804.46 ft)
400
500 m (1640.42 ft)
200
275 m (902.23 ft)
160
220 m (721.78 ft)
500
550 m (1804.46 ft)
400
500 m (1640.42 ft)
200
275 m (902.23 ft)
160
220 m (721.78 ft)
Advertisement
Table of Contents
