The S6520XE-54QC-HI switch comes with the two fan tray slots empty. You must install two fan trays
of the same model for the switch. In
tray slots. For more information about installing and removing a fan tray, see
fan
tray."
The S6520XE-54QC-HI switch comes with a filler panel in each expansion slot. You can select
expansion cards for the switch as required. In
installed in the expansion slots. For more information about installing and removing an expansion
card, see
"Installing/removing an expansion
Technical specifications
Table 7 Technical specifications
Item
Dimensions (H × W × D)
Weight
Console port
USB port
Management Ethernet port
SFP+ port
QSFP+ port
Expansion slot
Power module slot
Fan tray slot
Input voltage
Static power consumption
Maximum power consumption
Chassis leakage current
compliance
Melting current of power module
fuse
Operating temperature
Relative humidity
Fire resistance compliance
Figure
37, two LSWM1FANSCE fan trays are installed in the fan
Figure
card."
S6520XE-54QC-HI
43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in)
≤ 7.5 kg (16.53 lb)
•
1 × micro USB console port
•
1 × serial console port
You can access the switch only through the micro USB console port if
you connect both ports.
1
1
48
2
2, on the rear panel
2, on the rear panel
2, on the rear panel
•
AC-input:
Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
•
High-voltage DC-input:
Rated voltage range: 240 VDC
Max voltage range: 180 VDC to 320 VDC
•
Single AC input: 62 W
•
Dual AC inputs: 69 W
•
Single AC input: 198 W
•
Dual AC inputs: 201 W
UL60950-1, EN60950-1, IEC60950-1, GB4943
•
AC-input: 7.56 A/250 V
•
High-voltage DC-input: 7.56 A/240 V
-5°C to 45°C (23°F to 113°F)
5% to 95%, noncondensing
UL60950-1, EN60950-1, IEC60950-1, GB4943
33
37, two LSWM4SP8PM interface cards are
"Installing/removing a