SolarEdge SEK-I Series Installation Manual page 38

37 Mounting and Connecting the Synergy Manager and Synergy Units
NOTE
Make sure the mounting surface or structure can support the weight of 82 kg
(for inverter with two Synergy Units) or 114 kg (for inverter with three Synergy
Units) of the inverter and brackets. Make sure that the mounting surface is at
least 100.8 cm / 39.68" x 114.5 cm / 45".
CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting
techniques, and if required - a lifting aid.
ATTENTION
Objet lourd. Pour éviter la fatigue musculaire ou des blessures au dos, utilisez
des techniques de levage appropriées et, si nécessaire - un auxiliaire de levage
lors du retrait.
CAUTION!
SolarEdge inverters and Power Optimizers can be installed at a minimum
distance of 50 m/ 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
Power Optimizer.
For SolarEdge inverters installed at a distance of 200 m / 655 ft or closer to the
shoreline, special brackets purchased separately from SolarEdge and SS304
stainless screws are required.
ATTENTION!
Les onduleurs SolarEdge peuvent être installés à une distance minimum de 50m
de la ligne d'eau de l'océan ou autre environnement salin, tant qu'il n'y a pas
d'éclaboussements d'eau salée directs sur l'onduleur.
Pour les onduleurs SolarEdge installés à une distance de 200 m ou moins du
rivage, des supports spéciaux achetés séparément auprès de SolarEdge et des
vis inox SS304 sont nécessaires.
To mount the inverter:
1. Determine the inverter mounting location on a wall or stud framing. It is
recommended to mount the inverter in a location protected from direct sunlight.
NOTE
When installing the inverter on a stud framing or a rail, avoid wobbly
installation by adding back support at the lower back side of the Synergy
Manager and Synergy Units (See Figure 15 )
2. Allow for proper heat dissipation, follow the guidelines specified in
Note - Clearance Guidelines
Three Phase Inverter with Synergy Technology P/N: SExxK-xxxxIxxxx SExxK-xxxxIxxxx
.
Application