Basic Functions (Android) - Siemens Simotics Connect 400 Operating Instructions Manual

8.3

Basic functions (Android)

You can find the most important basic functions of the connectivity module in the "SIMOTICS
CONNECT" menu of the "SIDRIVE IQ Config" application.
An overview of all of the basic functions is shown in the following table:
Function
Commissioning
Delete Asset (Offboard‐
ing)
Identification
Send data to Mind‐
Sphere
Battery replacement
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE
Description
Starts the onboarding process for "SIDRIVE IQ Fleet".
The process to disconnect the connectivity module from the MindSphere application "SIDRIVE IQ
Fleet" - including deleting all data - is called offboarding.
Offboarding is the precondition for a new commissioning process (onboarding) to "SIDRIVE IQ Fleet".
Helps you to visually identify the currently connected connectivity module. The connectivity module
LED flashes for five seconds.
Starts transfer of the measurement data from the memory of the connectivity module to "SI‐
DRIVE IQ Fleet".
Precondition: The onboarding process has already been performed.
Sets the battery status display to 100% after battery replacement (Page 104).
Maintenance
8.3 Basic functions (Android)
101