Siemens Simotics Connect 400 Operating Instructions Manual page 77

Hide thumbs Also See for Simotics Connect 400:

Table of Contents

3. Select the operating point. If there are multiple parameter sets in the rating data, select the

parameter set that matches the connection conditions of your motor.

4. Select one of the following operating modes:

– Line operation - direct-on-line operation (DOL)

– Converter operation - variable speed drive operation (VSD)

Note

With the current firmware version 0.6.0, for motors in converter operation (VSD) in SIDRIVE

IQ Fleet, no values are displayed for torque, electrical power consumption, and energy

consumption.

SIMOTICS CONNECT 400

Operating Instructions, 08/2021, A5E50161952B AE

Commissioning

6.3 Commissioning with iOS

Table of Contents