Simotics Connect 400" Connectivity Module - Siemens Simotics Connect 400 Operating Instructions Manual

Description

3.2 "SIMOTICS CONNECT 400" connectivity module

3.2 "SIMOTICS CONNECT 400" connectivity module
The connectivity module mounted on the motor captures important operating and status
information of the motor.
The captured motor data are transmitted to SIDRIVE IQ Fleet via a WLAN interface and analyzed.
Note
The SIMOTICS CONNECT 400 connectivity module can be used in combination with rib-cooled
low-voltage induction motors (see Technical specifications (Page 111)).
Components
The connectivity module encompasses the following components:
• Integrated sensors to measure the motor data
• Data memory
• Processor
• Bluetooth module
• WLAN communication module
• Lithium battery for the power supply
The Connectivity Kit contains the following components in addition to the connectivity module:
• Metal bracket for mounting on the motor housing
• Fastening screws
12
SIMOTICS CONNECT 400
Operating Instructions, 08/2021, A5E50161952B AE