baltur TBML 80 PN Manual Instructions For Use page 63

COMBUSTION HEAD ADJUSTMENT
DIAGRAM
BURNER X
TBML 80 PN 87 ÷ 95
TBML 160 PN 119 ÷ 155
X= Distance combustion head-disk; adjust the distance X following
the indications below:
a) loosen screw 1
b) turn screw 2 to position the combustion head 3, referring to
index 4.
c) adjust the distance X between the minimum and maximum
according to the indications in the table.
! The above adjustments are indicative only;
position the combustion head according
to the characteristics of the combustion
chamber.
ELECTRODE / IONIZATION PROBE ADJUSTMENT DIAGRAM
Mod. A
1 ÷ 1.5 20 ÷ 21 6 ÷ 7
TBML 80 PN
1 ÷ 1.5 20 ÷ 21 6 ÷ 7
TBML 160 PN
After installing the nozzles, check the correct position of the
electrodes and disk according to the following measurements
indicated in mm.
It is advisable to check the measurements after any work on the
head.
Value indicated by
index 4
1 ÷ 1,5
1 ÷ 5
B C D E
3 ÷ 4 5 ÷ 6
3 ÷ 4 8 ÷ 9
25 / 36
0006081428_201406
1- Diffuser
2- Internal diffuser
3- Flame disk
4 - Ignition electrodes
5- Nozzles
6- Nozzle holder
RECOMMENDED NOZZLES STEINEN type SS 45° (TBML 80 PN)
MONARCH type HV 45° (TBML 160 PN)