Honeywell T5820XL Installation And Service Manual page 60

Chapter 5 - Servicing
WARNING
Do not damage the EMI gasket fingers while removing/installing boards.
CAUTION
Use a grounding strap and grounded work surfaces and equipment when handling any
electrostatically sensitive components such as the video cards, NIC adapter cards, and SCSI
controller cards. Store and transport parts only in electrostatically safe containers.
To replace/add the power adapter card
1. Remove the side cover of the workstation.
2. Wear a grounded ESD wrist strap and remove the 6" SATA to LP4 female/male power cable
adapter.
3. Locate the PCI slot 6. Press the blue color notch and push the cardholder back.
- 60 -