Removable Media Specifications; Specific Slot Configuration; Basic Board Configuration - Honeywell T5820XL Installation And Service Manual

Chapter 2 - Planning
Standard ports
Front
One Universal Audio Jack
Four USB 3.1 Gen1
2.3.2

Removable media specifications

The Honeywell Configured DELL T5820XL workstation has four 3.5-inch bay. The system is
configured with one (1) removable media drive this drive is a SATA CD-RW/DVD±RW combo drive.
The SATA CD-RW/DVD±RW drive is connected to a SATA 1 port connector on the motherboard.
Supported remote-removable media for Windows operating system
The Windows operating system removable media drives can be mounted in an Icon Series console
with an eSATA to USB cable adapter. The following table provides specifications for the removable
media.
2.4

Specific slot configuration

NOTE
A Local Control Network Processor (LCNP) board and LCN Media Access Unit (MAU) are no
longer used if the Workstation has been upgraded to be an ELCN node.
The Quad Video Graphics is the default option offered with the Honeywell Configured DELL
T5820XL Workstation. The following board configuration layouts will specify available system
configurations:

Basic board configuration

l
Basic board configuration for quad screen Experion (T-node) systems
l
Basic board configuration for quad screen Experion (ES-C/ES-F) FTE systems
l
Basic board configuration using Wyse RPS for Experion (TP-THNCL2/3)
l
Basic board configuration using Matrox Extio2 RPS for Experion ES-C/ES-F (TP-RPSF02)
l
Basic board configuration for PCUS (dual LCN) systems
l
2.4.1 Basic board configuration
The following table describes the standard basic board configuration for the workstation.
Rear
One Audio Line in/Microphone
One Audio Line out
One RJ45 Network
Six USB 3.1 Gen1
One Serial port
One Keyboard
One Mouse
- 16 -