Honeywell T5820XL Installation And Service Manual page 58

Chapter 5 - Servicing
5. Disconnect cables from the card being replaced.
WARNING
Do not damage the EMI gasket fingers while removing/installing boards.
CAUTION
Use a grounding strap and grounded work surfaces and equipment when handling any
electrostatically sensitive components such as the video cards, NIC adapter cards, and SCSI
controller cards. Store and transport parts only in electrostatically safe containers.
To replace video card
1. Remove the side cover of the workstation.
2. Locate the PCI slot 2. Press the blue color notch and push the cardholder back.
3. Wear a grounded ESD wrist strap and remove the existing video card in the PCIe slot 2.
4. Remove the existing video card in the PCIe slot 2.
- 58 -