Basic Board Configuration For Quad Screen Experion (T-Node) / Single Lcn Pcus Systems; Basic Board Configuration For Quad Screen Experion (Es-C/Es-F) Fte Systems17; Basic Board Configuration Using Wyse Rps For Experion (Tp-Thncl2/3) - Honeywell T5820XL Installation And Service Manual

Slot number
6
5
4
3
2
1
2.4.2 Basic board configuration for quad screen Experion (T-node) /
Single LCN PCUS systems
The following table describes the standard basic board configuration for quad screen Experion (T-
node).
Slot number
6
5
4
3
2
1
NOTE
PCUS is not supported with FTE. Incase of PCUS, remove the Broadcom 5720 network card
from the system.
2.4.3 Basic board configuration for quad screen Experion (ES-C/ES-
F) FTE systems
The following table describes the standard basic board configuration for quad screen Experion
(ES-C/ES-F node) FTE systems.
Slot number
6
5
4
3
2
1
2.4.4 Basic board configuration using Wyse RPS for Experion (TP-
THNCL2/3)
The following table describes the standard basic board configuration using Wyse RPS for Experion.
Slot type
PCI
PCIe Gen3 x4
PCIe Gen3 x16
PCIe Gen3 x1
PCIe Gen3 x16
PCIe Gen3 x8
Slot type Description
PCI Empty or Power Adapter Harness
PCIe Gen3 x4
PCIe Gen3 x16
PCIe Gen3 x1 LCNP4e2
PCIe Gen3 x16 nVIDIA Quadro P600
PCIe Gen3 x8 Broadcom 5720 Dual Port adapter
Slot type Description
PCI Empty or Power Adapter Harness
PCIe Gen3 x4
PCIe Gen3 x16
PCIe Gen3 x1
PCIe Gen3 x16 nVidia Quadro P600
PCIe Gen3 x8 Broadcom 5720 Dual Port adapter
Description
nVIDIA Quadro P600
- 17 -
Chapter 2 - Planning