Connecting Touchscreen Adapter Cable; Connect The Mixed Usb And Serial Port Solutions; Remote Peripheral Solution - Honeywell T5820XL Installation And Service Manual

Chapter 3 - Installing
11. Perform the following to connect the IEC power cord (51305830-100):
a. Connect one female end to the OEP/IKB power adapter (51197184-100).
b. Connect the other female end to the power entry.
c. Connect the male end to the original workstation power cord.
3.11

Connecting touchscreen adapter cable

3.11.1

Connect the mixed USB and serial port solutions

3.12

Remote Peripheral Solution

The Honeywell configured Dell Precision T5820XL workstation can be remotely accessed through
the Dell Wyse Z90DE7 Thin Client RPS or Matrox Extio2 RPS.
3.12.1 Dell Wyse Z90DE7 Thin Client RPS
The Honeywell configured Dell Precision T5820XL workstation can be remotely accessed through
the Dell Wyse Z90DE7 Thin Client RPS (up to 4 monitors, keyboard, cursor movement devices,
audio and drives) that can support CAT5 standard length. The Dell Wyse Z90DE7 Thin Client RPS
extends the audio, video, and USB signals through a network cable connection to the CPU of a
remote computer. This configuration allows the flexibility of separating the CPU and hard disks
from the user interface without losing the signal integrity.
The following table displays the model numbers for the RPS.
Model number
TP-THNCL2-xxx
TP-THNCL3-xxx
RPS
RPS Z90 DUAL VID THIN CLNT
RPS Z90 QUAD VID THIN CLNT
- 41 -