Appendix A. Sek002 Specifications; Appendix B. Remote Connection - Honeywell SEK002 User Instructions

Sensor Evaluation Kit, SEK002

APPENDIX A. SEK002 SPECIFICATIONS

Table A1. SEK002 Specifications
Characteristic
Temperature range
1
Humidity range
1
Power supply:
internal (Arduino Uno Rev3)
external
Compatible sensors
Associated software
1 See Appendix B. Remote Connection if evaluation conditions are different.

APPENDIX B. REMOTE CONNECTION

Use jumper wires to connect a remotely-located sensor to either the sockets provided on the SEK002 or directly to the Arduino UNO
board. See Tables B1, B2, B3, and B4 for SEK002 sockets and correlating sensor pins/pads.
Table B1. ABP Series Pinout
SEK002
Socket Designator
J5
J4
P3
P3
P3
P5 5 V or 3.3 V
P5
J5
J4
Use only one of these pins, depending on the package style of the sensor.
1
10 Sensing and Internet of Things
Parameter
20°C to 30°C [68°F to 86°F]
30 %RH to 70 %RH
3.3 V or 5 V
3.3 V or 5 V
ABP Series (digital versions only)
MPR Series
HPM Series
Honeywell HumidIcon: HIH6000 Series, HIH6100 Series, HIH7000 Series, HIH8000 Series, HIH9000 Series
Sensor Evaluation Kit SEK002 Version 1.0.exe
Arduino Firmware SEK002 Version 1.0.hex
XLoader.zip
Pin/Pad
Pin
Designator
3 MISO
3 SCLK
5 SS
1
6 SS
1
7 SS
1
Vsupply
6 GND
1 SDA
1 SCL
Sensor
I C Pin/Pad SPI Pin/Pad
2
- 5
- 6
- 3
- 3
- 3
2 2
1 1
5 -
6 -
Issue A
32333651
Function
sensor output
clock
chip select for DIP
chip select for SMT
chip select for leadless SMT
supply
ground
SDA
SCL