Table of Contents
Advertisement
The documents must all guarantee the following characteristics:
• Use paper matching the indicated characteristics.
• They must have well defined top and left edges, with a square angle tolerance of 0.1° on all
edges.
• The paper must not have holes, perforations, folds or tears anywhere within the print area of
the document.
• The radius on a corner of the form must be within 9.5 mm from the left or right edge.
• The form to be printed must not contain foreign material.
• Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.
• Never print on documents with metallic or hard plastic fasteners or staples, they may damage
the printer.
• To get the maximum print contrast you should print on white or light colored paper. You may
overstrike to improve the low contrasting paper.
• It is preferable to use single and multiple documents with the fibre running in the insertion
direction of the printing unit.
• Recycled paper is permitted on principle.
• It is preferable to print on multiple forms with a narrow glue strip or top-gluing. The gluing
must not cause waving in the set of forms.
P
a
p
e
r
S
p
e
c
P
a
p
e
r
S
p
e
c
51
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
Advertisement
Table of Contents
Need help?
Do you have a question about the MDP40T plus and is the answer not in the manual?