Compuprint MDP40T plus User Manual page 44

Setup Parameter Values
CP437, CP437G,
CODE PAGE
96GREEK, CP850,
CP851, CP852, CP853,
CP855, CP857, CP858,
CP860, CP862, CP863,
CP864, CP865, CP866,
CP867, CP876, CP877,
GOST, TASS, 8859/1,
8859/2, 8859/3, 8859/4,
8859/5, 8859/6, 8859/7,
8859/8, 8859/9, 8859/15
LINE MODE LF=LF, CR=CR
CR=LF+CR
LF=LF+CR
LF&CR=LF+CR
WRAP MODE truncate, autowrap
SLASHED ZERO disabled, enabled
Description
Selects the code page for both the IBM and the EPSON
emulations.
If the printer receives a LF code (LF), it only performs a line feed.
If the printer receives a CR code (CR), it only performs a carriage
return.
If the printer receives a CR code (CR), it performs a carriage
return followed by a line feed. If the printer receives a LF code
(LF), it performs a line feed.
If the printer receives a LF code (LF), it performs a line feed
followed by a carriage return. If the printer receives a CR code
(CR), it only performs a carriage return.
If the printer receives a LF code (LF) or a CR code (CR), it
performs both a line feed and a carriage return.
The data exceeding the line length are truncated ( truncate ) or
printed on the following line ( autowrap ).
Selects the printing character for zero, with a slash (enabled) or
without (disabled).
40