Compuprint MDP40T plus User Manual page 34

Each printer setup form is identified by a marker in the upper left corner of the page as follows:
Configuration Setup
Program 1
Program 2
If you press the
LQ
The printing of the printer setup forms starts. The forms are printed according to the selection
made with the
PROGRAM
If you select one of the Program couples
printing on cut sheets and one for fanfold.
whereas and define the printing parameters for the fanfold paper.
P3 P4
The program couples may be selected only if the same emulation is selected for the two
The selection of the Program Setup is made simply pressing the
from one Program Setup to another, the printer resets before setting the parameters as defined
in the new program setup.
Program 3
Program 4
key:
key.
or you can define one parameters set for
P1/P3 P2/P4
and define the values for printing on cut sheets,
P1 P2
programs.
30
key. When passing
PROGRAM