On Line Key - Compuprint MDP40T plus User Manual

If you press the
ON LINE
• the printer self-test is printed. See
is possible to check the current printer parameters.
• once the self-test is finished, the printer remains in Setup Mode.
If you press the
PROGRAM
• the Px leds change and you can select the Setup Page you want to print as follows:
P1
P2
All setup pages
P3
P4
P1
P2
Configuration page
P3
P4
P1
P2
Program 1 page
P3
P4
= lit
= unlit
The printer setup forms contain all printer parameters and the values that can be set. The
current value is indicated by an asterisk (*).
For a detailed description of the parameters and the settings see "Setup Parameters" later in this
key:
"Printing a Test
key:
P1
P2
P3
P4
P1
P2
P3
P4
P1
P2
P3
P4
manual.
Page" before in this manual. In this way it
29
Program 2 page
Program 3 page
Program 4 page