Compuprint MDP40T plus User Manual page 40

PROGRAM 1
PROGRAM 3
Setup Parameter Values
PROTOCOL EPSON 570, IBM XL24E, IBM
XL24E AGM, IBM 2390
FONT Draft, Courier, OCR-B, Gothic,
Prestige, Presentor, OCR-A,
Script, Boldface, locked Draft
HORIZONTAL 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20
PITCH cpi
VERTICAL PITCH 5 lpi, 6 lpi, 8 lpi,
FORM LENGTH # lines, A4, letter, A5, legal
PROGRAM 2
PROGRAM 4
Description
Defines the printer protocol.
Selects the font. If you set locked Draft the printer
prints always with this font, independently from the font
set via software.
Selects the character spacing in characters per inch (cpi).
Selects the line spacing in lines per inch (lpi).
Sets the page length in number of lines or standard
formats A4, Letter, A5 or Legal. If you select # lines ,
you must indicate the number of lines you want to set in
the scheme below this selection. The values range
between 0 and 255. To set the values combine the
numbers considering that the first line corresponds to the
hundreds, the second line to the tens and the third line to
the units. See the example below.
36