Installing The Optical Drive Or Tape Drive - Dell E30S Series Owner's Manual

Figure 25. Cabling— optical drive and tape drive
1. optical drive connector on system board
3. SAS tape drive connector on the PERC card
5. system board
7. tape drive
Next steps
1. Install the optical drive or tape drive.
2. Follow the procedure listed in the After working inside your system section.

Installing the optical drive or tape drive

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in Before working inside your system section.
82 Installing and removing system components
2. tape drive connector on system board
4. PERC card
6. SAS tape drive
8. optical drive