Removing A Gpu Card - Dell E30S Series Owner's Manual

b. expansion card
c. expansion card connector
Figure 67. Installing the filler bracket
1. expansion card latch
3. filler bracket
Next steps
1. Install the expansion card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.

Removing a GPU card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
4. Remove the expansion-card holder.
Steps
1. Disconnect the cables from the GPU card.
CAUTION: Do not use excessive force when removing the cables as it can damage the connectors.
2. Open the two expansion-card latches by pressing the latches.
2. slot
4. guide pin
Installing and removing system components 127