Inside The System - Dell E30S Series Owner's Manual

Figure 22. Installing the system cover
1. system
3. cover release latch
Next steps
1. Place the system upright on its feet on a flat and stable surface.
2. If removed, install the front bezel.
3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Turn on the system, including any attached peripherals.
5. Follow the procedure listed in the After working inside your system section.

Inside the system

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
Components that are hot-swappable are marked orange and touch-points on the components are marked blue.
NOTE:
2. system cover
4. cover release latch lock
Installing and removing system components 79