Front Panel Features Of 8 X 3.5-Inch Hot Swappable Hard Drive Chassis In Rack Mode - Dell E30S Series Owner's Manual

Front panel features of 8 x 3.5-inch hot swappable hard drive
chassis in rack mode
Figure 4. Front panel features - 8 x 3.5-inch hot swappable hard drive chassis in rack mode
1. Power button
2. NMI button
3. System identification button
4. LCD menu buttons
5. Information tag
6. LCD panel
7. USB management port/iDRAC Direct port
8. Video connector
9. USB port
10. Optical drive or tape-drive bay
11. Physical drives
Table 4. Front panel features — 8 x 3.5-inch hot swappable hard drive chassis
Indicator, button, or connector
Power button
NMI button
System identification button
14 Dell PowerEdge T430 system overview
Icon Description
Indicates if the system is powered on or off. Press the power
button to manually power on or off the system.
NOTE:
ACPI-compliant operating system.
Press the Non-Maskable Interrupt (NMI) button to troubleshoot
software application and device driver errors when running certain
operating systems. Use the end of a paper clip to press the NMI
button.
NOTE:
support personnel or by the operating system documentation.
NOTE:
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
Press the power button to gracefully shut down an
Use the NMI button only if directed to do so by qualified
To reset the iDRAC (if not disabled on the iDRAC setup