Compass Mode - Conrad 372884 Operation Instructions Manual

14. Compass mode

In the main display of the Compass mode, the direction to the North Pole is indicated by an arrow and
the alignment of the watch in degrees.
For compass function, the pulse watch must be held horizontal.
Compass Calibration
Proceed as follows to calibrate the compass:
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select the 'Menu:' → 'Settings' → 'System' → 'Compass' → 'Calibrate'.
• Slowly and uniformly turn the pulse watch horizontally by 360° at least twice.
• As soon as the compass is calibrated successfully, 'Done!' is displayed.
66