C) Setting The Time When The Gps Reception Is Deactivated; D) Saving Way Points - Conrad 372884 Operation Instructions Manual

In the main menu
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select 'Menu:' → 'GPS' → 'On/Off'. Press the 'VIEW' (4) key to activate or deactivate the GPS
receiver.

c) Setting the time when the GPS reception is deactivated

The GPS reception is deactivated automatically after an adjustable time.
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select 'Menu:' → 'GPS' → 'Timeout'. Press the 'VIEW' (4) key to set the time (5 or 30 minutes)
when the GPS reception will be automatically deactivated.

d) Saving way points

• Press the 'MODE' (2) key until you are in Navigation mode.
• In Navigation mode, hold down the 'LAP / RESET' (5) key for about three seconds to save the
current position as way point.
63