Connecting The Pulse Watch To A Computer - Conrad 372884 Operation Instructions Manual

9. Connecting the pulse watch to a computer

To charge the pulse watch and to analyse the saved data using a computer, you must connect the
pulse watch to a computer:
• Connect the contact clip of the USB cable to the pulse watch in such a way that the contacts are
connected to the USB contacts (7) on the bottom side of the pulse watch.
• Connect the pulse watch with the help of the USB cable to a computer.
On connecting the pulse watch to a computer for the fi rst time, an appropriate driver
('Sunplus USB to Serial COM Port') is installed. For this, the installation CD-ROM of
the 'GPS MASTER' software must be in the CD-ROM drive.
53