D) Setting / Activating The Countdown Timer - Conrad 372884 Operation Instructions Manual

d) Setting / activating the countdown timer

• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the 'MODE' (2) key for 3 seconds until 'Menu:' is displayed.
With the 'ST. / STP' (3) and 'LAP / RESET' (5) keys select the individual menu items,
with the 'VIEW' (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the 'MODE' (3) key, return to the previous menu.
• Select the 'Menu:' → 'Settings' → 'Timer'.
• Press the 'VIEW' (4) key to select between hour, minute and second. With the 'ST. / STP' (3) and
'LAP / RESET' (5) keys, the corresponding values can change.
Activating the countdown timer
• In Time mode, press the 'VIEW' (4) key twice.
• Press the 'ST. / STP' (3) key to start or stop the countdown timer.
• To reset the countdown timer, press the 'LAP / RESET' (5) key. The countdown timer must not be
activated.
In the last 10 seconds of the countdown timer, you will hear a short alarm tone per
second. As soon as the countdown ends, you will hear a long alarm tone. Press any
key to switch off the alarm tone.
59